El código que pondré en esta entrada es una forma que encontré para sellar cadenas utilizando la llave privada (archivo .key) que otorga el SAT en México así como un método para verificar la autenticidad del sello.
Lo primero es crear la clase con la que se abre la llave privada.
class KeyFile
{
public RSACryptoServiceProvider OpenKeyFile(String filename, string pPassword)
{
RSACryptoServiceProvider rsa = null;
byte[] keyblob = GetFileBytes(filename);
if (keyblob == null)
return null;
rsa = DecodePrivateKeyInfo(keyblob, pPassword); //PKCS #8 encrypted
if (rsa != null)
{
return rsa;
}
return null;
}
private static byte[] GetFileBytes(String filename)
{
if (!File.Exists(filename))
return null;
Stream stream = new FileStream(filename, FileMode.Open);
int datalen = (int)stream.Length;
byte[] filebytes = new byte[datalen];
stream.Seek(0, SeekOrigin.Begin);
stream.Read(filebytes, 0, datalen);
stream.Close();
return filebytes;
}
public static RSACryptoServiceProvider DecodeRSAPrivateKey(byte[] privkey)
{
byte[] MODULUS, E, D, P, Q, DP, DQ, IQ;
// --------- Set up stream to decode the asn.1 encoded RSA private key ------
MemoryStream mem = new MemoryStream(privkey);
BinaryReader binr = new BinaryReader(mem); //wrap Memory Stream with BinaryReader for easy reading
byte bt = 0;
ushort twobytes = 0;
int elems = 0;
try
{
twobytes = binr.ReadUInt16();
if (twobytes == 0x8130) //data read as little endian order (actual data order for Sequence is 30 81)
binr.ReadByte(); //advance 1 byte
else if (twobytes == 0x8230)
binr.ReadInt16(); //advance 2 bytes
else
return null;
twobytes = binr.ReadUInt16();
if (twobytes != 0x0102) //version number
return null;
bt = binr.ReadByte();
if (bt != 0x00)
return null;
//------ all private key components are Integer sequences ----
elems = GetIntegerSize(binr);
MODULUS = binr.ReadBytes(elems);
elems = GetIntegerSize(binr);
E = binr.ReadBytes(elems);
elems = GetIntegerSize(binr);
D = binr.ReadBytes(elems);
elems = GetIntegerSize(binr);
P = binr.ReadBytes(elems);
elems = GetIntegerSize(binr);
Q = binr.ReadBytes(elems);
elems = GetIntegerSize(binr);
DP = binr.ReadBytes(elems);
elems = GetIntegerSize(binr);
DQ = binr.ReadBytes(elems);
elems = GetIntegerSize(binr);
IQ = binr.ReadBytes(elems);
Console.WriteLine("showing components ..");
// ------- create RSACryptoServiceProvider instance and initialize with public key -----
RSACryptoServiceProvider RSA = new RSACryptoServiceProvider();
RSAParameters RSAparams = new RSAParameters();
RSAparams.Modulus = MODULUS;
RSAparams.Exponent = E;
RSAparams.D = D;
RSAparams.P = P;
RSAparams.Q = Q;
RSAparams.DP = DP;
RSAparams.DQ = DQ;
RSAparams.InverseQ = IQ;
RSA.ImportParameters(RSAparams);
return RSA;
}
catch (Exception)
{
return null;
}
finally { binr.Close(); }
}
private static int GetIntegerSize(BinaryReader binr)
{
byte bt = 0;
byte lowbyte = 0x00;
byte highbyte = 0x00;
int count = 0;
bt = binr.ReadByte();
if (bt != 0x02) //expect integer
return 0;
bt = binr.ReadByte();
if (bt == 0x81)
count = binr.ReadByte(); // data size in next byte
else
if (bt == 0x82)
{
highbyte = binr.ReadByte(); // data size in next 2 bytes
lowbyte = binr.ReadByte();
byte[] modint = { lowbyte, highbyte, 0x00, 0x00 };
count = BitConverter.ToInt32(modint, 0);
}
else
{
count = bt; // we already have the data size
}
while (binr.ReadByte() == 0x00)
{ //remove high order zeros in data
count -= 1;
}
binr.BaseStream.Seek(-1, SeekOrigin.Current);
//last ReadByte wasn't a removed zero, so back up a byte
return count;
}
public static RSACryptoServiceProvider DecodePrivateKeyInfo(byte[] pkcs8)
{
// encoded OID sequence for PKCS #1 rsaEncryption szOID_RSA_RSA = "1.2.840.113549.1.1.1"
// this byte[] includes the sequence byte and terminal encoded null
byte[] SeqOID = { 0x30, 0x0D, 0x06, 0x09, 0x2A, 0x86, 0x48, 0x86, 0xF7, 0x0D, 0x01, 0x01, 0x01, 0x05, 0x00 };
byte[] seq = new byte[15];
// --------- Set up stream to read the asn.1 encoded SubjectPublicKeyInfo blob ------
MemoryStream mem = new MemoryStream(pkcs8);
int lenstream = (int)mem.Length;
BinaryReader binr = new BinaryReader(mem); //wrap Memory Stream with BinaryReader for easy reading
byte bt = 0;
ushort twobytes = 0;
try
{
twobytes = binr.ReadUInt16();
if (twobytes == 0x8130) //data read as little endian order (actual data order for Sequence is 30 81)
binr.ReadByte(); //advance 1 byte
else if (twobytes == 0x8230)
binr.ReadInt16(); //advance 2 bytes
else
return null;
bt = binr.ReadByte();
if (bt != 0x02)
return null;
twobytes = binr.ReadUInt16();
if (twobytes != 0x0001)
return null;
seq = binr.ReadBytes(15); //read the Sequence OID
if (!CompareBytearrays(seq, SeqOID)) //make sure Sequence for OID is correct
return null;
bt = binr.ReadByte();
if (bt != 0x04) //expect an Octet string
return null;
bt = binr.ReadByte(); //read next byte, or next 2 bytes is 0x81 or 0x82; otherwise bt is the byte count
if (bt == 0x81)
binr.ReadByte();
else
if (bt == 0x82)
binr.ReadUInt16();
//------ at this stage, the remaining sequence should be the RSA private key
byte[] rsaprivkey = binr.ReadBytes((int)(lenstream - mem.Position));
RSACryptoServiceProvider rsacsp = DecodeRSAPrivateKey(rsaprivkey);
return rsacsp;
}
catch (Exception)
{
return null;
}
finally { binr.Close(); }
}
public static RSACryptoServiceProvider
DecodePrivateKeyInfo(byte[] encpkcs8, string pPassword)
{
// encoded OID sequence for PKCS #1 rsaEncryption szOID_RSA_RSA = "1.2.840.113549.1.1.1"
// this byte[] includes the sequence byte and terminal encoded null
byte[] OIDpkcs5PBES2 = { 0x06, 0x09, 0x2A, 0x86, 0x48, 0x86, 0xF7, 0x0D, 0x01, 0x05, 0x0D };
byte[] OIDpkcs5PBKDF2 = { 0x06, 0x09, 0x2A, 0x86, 0x48, 0x86, 0xF7, 0x0D, 0x01, 0x05, 0x0C };
byte[] OIDdesEDE3CBC = { 0x06, 0x08, 0x2A, 0x86, 0x48, 0x86, 0xF7, 0x0D, 0x03, 0x07 };
byte[] seqdes = new byte[10];
byte[] seq = new byte[11];
byte[] salt;
byte[] IV;
byte[] encryptedpkcs8;
byte[] pkcs8;
int saltsize, ivsize, encblobsize;
int iterations;
// --------- Set up stream to read the asn.1 encoded SubjectPublicKeyInfo blob ------
MemoryStream mem = new MemoryStream(encpkcs8);
int lenstream = (int)mem.Length;
BinaryReader binr = new BinaryReader(mem); //wrap Memory Stream with BinaryReader for easy reading
byte bt = 0;
ushort twobytes = 0;
try
{
twobytes = binr.ReadUInt16();
if (twobytes == 0x8130)
//data read as little endian order (actual data order for Sequence is 30 81)
binr.ReadByte(); //advance 1 byte
else if (twobytes == 0x8230)
binr.ReadInt16(); //advance 2 bytes
else
return null;
twobytes = binr.ReadUInt16(); //inner sequence
if (twobytes == 0x8130)
binr.ReadByte();
else if (twobytes == 0x8230)
binr.ReadInt16();
seq = binr.ReadBytes(11); //read the Sequence OID
if (!CompareBytearrays(seq, OIDpkcs5PBES2)) //is it a OIDpkcs5PBES2 ?
return null;
twobytes = binr.ReadUInt16(); //inner sequence for pswd salt
if (twobytes == 0x8130)
binr.ReadByte();
else if (twobytes == 0x8230)
binr.ReadInt16();
twobytes = binr.ReadUInt16(); //inner sequence for pswd salt
if (twobytes == 0x8130)
binr.ReadByte();
else if (twobytes == 0x8230)
binr.ReadInt16();
seq = binr.ReadBytes(11); //read the Sequence OID
if (!CompareBytearrays(seq, OIDpkcs5PBKDF2)) //is it a OIDpkcs5PBKDF2 ?
return null;
twobytes = binr.ReadUInt16();
if (twobytes == 0x8130)
binr.ReadByte();
else if (twobytes == 0x8230)
binr.ReadInt16();
bt = binr.ReadByte();
if (bt != 0x04) //expect octet string for salt
return null;
saltsize = binr.ReadByte();
salt = binr.ReadBytes(saltsize);
bt = binr.ReadByte();
if (bt != 0x02) //expect an integer for PBKF2 interation count
return null;
int itbytes = binr.ReadByte(); //PBKD2 iterations should fit in 2 bytes.
if (itbytes == 1)
iterations = binr.ReadByte();
else if (itbytes == 2)
iterations = 256 * binr.ReadByte() + binr.ReadByte();
else
return null;
twobytes = binr.ReadUInt16();
if (twobytes == 0x8130)
binr.ReadByte();
else if (twobytes == 0x8230)
binr.ReadInt16();
seqdes = binr.ReadBytes(10); //read the Sequence OID
if (!CompareBytearrays(seqdes, OIDdesEDE3CBC)) //is it a OIDdes-EDE3-CBC ?
return null;
bt = binr.ReadByte();
if (bt != 0x04) //expect octet string for IV
return null;
ivsize = binr.ReadByte(); // IV byte size should fit in one byte (24 expected for 3DES)
IV = binr.ReadBytes(ivsize);
bt = binr.ReadByte();
if (bt != 0x04) // expect octet string for encrypted PKCS8 data
return null;
bt = binr.ReadByte();
if (bt == 0x81)
encblobsize = binr.ReadByte(); // data size in next byte
else if (bt == 0x82)
encblobsize = 256 * binr.ReadByte() + binr.ReadByte();
else
encblobsize = bt; // we already have the data size
encryptedpkcs8 = binr.ReadBytes(encblobsize);
SecureString secpswd = new SecureString();
foreach (char c in pPassword)
secpswd.AppendChar(c);
pkcs8 = DecryptPBDK2(encryptedpkcs8, salt, IV, secpswd, iterations);
if (pkcs8 == null) // probably a bad pswd entered.
return null;
RSACryptoServiceProvider rsa = DecodePrivateKeyInfo(pkcs8);
return rsa;
}
catch (Exception)
{
return null;
}
finally { binr.Close(); }
}
public static byte[] DecryptPBDK2(byte[] edata, byte[] salt,
byte[] IV, SecureString secpswd, int iterations)
{
CryptoStream decrypt = null;
IntPtr unmanagedPswd = IntPtr.Zero;
byte[] psbytes = new byte[secpswd.Length];
unmanagedPswd = Marshal.SecureStringToGlobalAllocAnsi(secpswd);
Marshal.Copy(unmanagedPswd, psbytes, 0, psbytes.Length);
Marshal.ZeroFreeGlobalAllocAnsi(unmanagedPswd);
try
{
Rfc2898DeriveBytes kd = new Rfc2898DeriveBytes(psbytes, salt, iterations);
TripleDES decAlg = TripleDES.Create();
decAlg.Key = kd.GetBytes(24);
decAlg.IV = IV;
MemoryStream memstr = new MemoryStream();
decrypt = new CryptoStream(memstr, decAlg.CreateDecryptor(), CryptoStreamMode.Write);
decrypt.Write(edata, 0, edata.Length);
decrypt.Flush();
decrypt.Close(); // this is REQUIRED.
byte[] cleartext = memstr.ToArray();
return cleartext;
}
catch (Exception e)
{
Console.WriteLine("Problem decrypting: {0}", e.Message);
return null;
}
}
private static bool CompareBytearrays(byte[] a, byte[] b)
{
if (a.Length != b.Length)
return false;
int i = 0;
foreach (byte c in a)
{
if (c != b[i])
return false;
i++;
}
return true;
}
}
Lo siguiente es crear la clase con la que se harán los procesos de sellado y verificado
class Sello
{
public byte[] FirmarCadena(string cadenaOriginal, string pKeyFile, string pPassword)
{
KeyFile kf = new KeyFile();
RSACryptoServiceProvider rsa = kf.OpenKeyFile(pKeyFile, pPassword);
if (rsa != null)
{
return rsa.SignData(Encoding.UTF8.GetBytes(cadenaOriginal), "SHA256");
}
return null;
}
public bool ValidarFirma(string publicCert, byte[] sello, string cadenaOriginal)
{
X509Certificate2 _ClavePublica = new X509Certificate2(publicCert);
RSACryptoServiceProvider rsa = new RSACryptoServiceProvider();
rsa.FromXmlString(_ClavePublica.PublicKey.Key.ToXmlString(false));
return rsa.VerifyData(Encoding.UTF8.GetBytes(cadenaOriginal), "SHA256", sello);
}
}
Ya por último así hacer uso de las clases:
class Program
{
static void Main(string[] args)
{
string pathCertificadoPublico = @"C:\fiel\ARCHIVO.cer";
string pathLlavePrivada = @"C:\fiel\Claveprivada_FIEL.key";
string cadenaOriginal = "esta es la cadena original";
Sello sello = new Sello();
var cadenaFirmada = sello.FirmarCadena(cadenaOriginal, pathLlavePrivada, "miContraseñaSegura");
Console.WriteLine("cadena original:");
Console.WriteLine(cadenaOriginal);
Console.WriteLine();
Console.WriteLine();
Console.WriteLine("cadena firmada:");
Console.WriteLine(Convert.ToBase64String(cadenaFirmada));
Console.WriteLine();
Console.WriteLine();
var resi = sello.ValidarFirma(pathCertificadoPublico, cadenaFirmada, cadenaOriginal);
Console.WriteLine("la firma es:");
Console.WriteLine(resi.ToString());
Console.WriteLine();
Console.WriteLine();
Console.WriteLine("MOSTRAR DATOS DEL CERTIFICADO PUBLICO");
Console.WriteLine();
/* MOSTRAR DATOS DEL CERTIFICADO PUBLICO*/
string sPathCer = pathCertificadoPublico;
byte[] yCert = File.ReadAllBytes(sPathCer);
X509Certificate2 oCSD = new X509Certificate2(yCert);
/*Vigencia del CSD*/
string sInicio = oCSD.GetEffectiveDateString();
string sFinal = oCSD.GetExpirationDateString();
Console.WriteLine("Fecha de inicio del certificado: " + sInicio);
Console.WriteLine("Fecha de expiración del certificado: " + sFinal);
Console.WriteLine();
/*No. de Serie del Certificado*/
string sNoSerie = Encoding.ASCII.GetString(oCSD.GetSerialNumber().Reverse().ToArray());
Console.WriteLine("Número de Serie: " + sNoSerie);
Console.WriteLine();
/*Issuer*/
string sIssuer = oCSD.Issuer;
Console.WriteLine("Issue: " + sIssuer);
Console.WriteLine();
/*El certificado incluye la llave privada?*/
bool bExisteKey = oCSD.HasPrivateKey;
Console.WriteLine("Contiene llave privada? - " + bExisteKey.ToString());
Console.WriteLine();
/*Subject*/
string sSubject = oCSD.Subject;
Console.WriteLine("Subject: " + sSubject);
Console.WriteLine();
/*Thubprint*/
string sThumprint = oCSD.Thumbprint;
Console.WriteLine("Thumbprint: " + sThumprint);
Console.WriteLine();
/*Certificado en base 64*/
string sCertRaw = Convert.ToBase64String(oCSD.Export(X509ContentType.Cert));
Console.WriteLine("Certificado: " + sCertRaw);
Console.WriteLine();
}
}
Gran parte del código fue tomado de aquí